service centers. Our equipment includes car lifts (2-post, 4-post, and scissor lifts), wheel balancers, tire changers, diagnostic tools, air compressors, brake lathes, engine hoists, alignment machines, and much more. Whether you are setting up a new workshop or upgrading your existing tools, we provide high-quality, durable, and efficient solutions tailored to your needs.
Yes, we offer warranties on most of our products. Warranty periods vary depending on the manufacturer and product type, ranging from 1 year to lifetime warranties. You can find warranty details on each product page.
What is the maximum load capacity of the 2-post lift with floor plate TLT-235SB?
The maximum load capacity is 3.5 tons.
What is the maximum load capacity of the 2-post lift with overhead cable TLT-235SC?
There are two versions: one with 3.5 tons capacity and another with 4 tons capacity.
What is the maximum load capacity of the 4-post lift TLT-440W?
The maximum load capacity is 4 tons.
What is the maximum lifting height of the lift?
The lift can raise the car up to 185 cm.
What is the lifting time of the lift?
The lifting process takes 55 seconds.
What is the lowering time of the lift?
The lowering process takes 40 seconds.
What is the required operating voltage for the lift?
The lift operates on either Single phase – 220V or Three phase – 380V.
How many amps does the lift consume?
The operating current is 16 Amps.
What is the required cable cross-section for operating the lift?
3 mm² double insulated cable (thermoplastic) is required.
What type of floor is required for installing the lift?
- Reinforced concrete floor with a minimum thickness of 25 cm across the workshop area (helicopter finish).
- OR one concrete base of 4×1×0.4 m without steel reinforcement.
- OR two concrete bases of 1×1×0.5 m each, with a 2 m distance between them.
Curing time: 7 days in summer and 10 days in winter. The company can provide concrete mix details.
What are the operating requirements for the lift?
- 10 liters of hydraulic oil 68
- 2 kg lithium grease
How many car brands are covered by the professional diagnostic devices PRO & PRO III?
The PRO 3 covers about 124 brands, nearly 2014 models, and all available ECUs.
How to use the professional diagnostic tool PRO & PRO III?
Connect the device plug
- Switch the car ignition ON (without starting the engine)
- Select the car make
- Select the model
- Select the engine capacity
- Select the ECU
- Read the stored trouble codes
- Record the codes (either in the device or on paper)
- Erase codes after fixing the issue
- Test-drive the car
- Repeat the steps to confirm the problem is resolved.
What is the difference between PRO and PRO 3?
They differ in tablet specifications such as battery capacity and screen size. The PRO 3 also supports the optional HD unit for heavy-duty vehicles.
What is the Bluetooth range of PRO and PRO 3 diagnostic tools?
They operate within a 10-meter range.
What coding/programming functions are supported by PRO & PRO 3?
- Programming new/replaced parts
- ABS brake bleeding
- Key coding for immobilizer
- Throttle body adaptation
- Resetting various warning lights (brake, service, steering, battery, TPMS, diesel filter, etc.)
Which car brands can the personal diagnostic tools work on?
They support most European, American, Asian, and Chinese brands.
Which ECUs can the personal diagnostic tools CRP 123 & CRP 129 handle?
They can read and clear codes from:
- Engine ECU
- Transmission ECU
- ABS
- Airbag (SRS)
Do the injector cleaning devices CNC-402A & CNC-601A support all gasoline injectors?
Yes, they support most injectors of European, Asian, American, and Chinese cars, with mechanical and electrical adapters included.
How many tests do the injector testers CNC-402A & CNC-601A perform?
Three main tests:
- Flow test – measures fuel flow of each injector
- Leak test – checks for leakage under pressure
- Spray pattern test – ensures proper atomization cone shape
Automatic mode allows all three tests in sequence.
What fluid is used for injector testing?
Petrochemical volatile fluids.
What cleaning fluid can be used in injector cleaning machines?
Commercially available petrochemical cleaners (e.g., JUNK, STP, EBRO).
What is the recommended ultrasonic cleaning time for injectors?
No more than 5 minutes.
What is the tank capacity of CNC-402A injector cleaner?
4 liters.
What happens if the test fluid level drops in the injector tester?
The device issues an alarm and shows an error code on the digital screen, prompting fluid refill.
Can a single injector be tested separately?
Yes, each injector can be tested individually by selecting its number.
When should the test fluid be replaced in the injector tester?
When the transparent fluid becomes dark-colored.
How to change the language in PRO & PRO 3 diagnostic tools?
By changing the tablet’s system language.
When should injectors be tested and cleaned?
- Delayed cold start
- Poor engine performance
- Increased fuel consumption
- Fuel not being injected
- Slow acceleration
Once your order has been processed and shipped, you will receive a confirmation email or SMS with a tracking number and a link to track your shipment. You can use this tracking number on our website or the courier's website to see the current status and estimated delivery date of your order. If you have an account with us, you can also log in to view your order history and tracking information directly from your dashboard.
Yes, we understand that sometimes a product may not meet your expectations. You can return or exchange equipment within a specified return period, usually 7 to 14 days from the date of delivery, as long as the item is unused, in its original packaging, and in resellable condition. Please contact our customer service team to initiate a return or exchange. Note that some items may be subject to restocking fees, and shipping costs are generally non-refundable unless the return is due to an error on our part.
Yes, we offer professional installation and setup services for most of the equipment we sell. Our experienced technicians can install, test, and ensure that the equipment is operating correctly and safely. This service helps you save time and ensures proper usage right from the start. Installation services may be included with your purchase or available at an additional cost, depending on the product and your location. Please contact us for details and availability in your area.
You can contact our customer support team through multiple convenient channels. We’re available via phone, email, live chat on our website, and social media platforms. Our support team is ready to assist you with any inquiries, order issues, technical support, or general questions. For faster service, please have your order number or product details ready when contacting us. Visit our “Contact Us” page for all the details and working hours.